NASTF Information Requests

Tracking: 709 Status: Closed
State: VA Name: Gregg
Category of Request: Reprogramming Manufacturer: 2005 NISSAN 5N1AN08W55C631469

Inquiry
Have you checked the OEM website?
Yes
Description of Repair unable to perform
Attempted to Program a Blank Tcm/Valve body on a 5 speed Rwd Xterra with the new 3.05 NERS Software -J2534. File Purchased 31020-75680 updated file was 31000 ea 10c I downloaded files and opened Exe file to get install instructions. 1) Both the blnk csv and the dat files in the reprogramming area ( per instructions) 2) 2 AT CSV and ENC files in the config area (per instructions) 3) Launched NERS -Used the after ecu header, then the programming header. 4) Selected tcm/valve body ecu # 31020 75680 - select the correct file to end EA 10c for the correct application. 5) NERS started the programming then errors out with (Error code N_DDL2;AT,BETTAI_STEP2_2RESP_ERR I attempted to repeat the same step as well as rechecking the files placement with in the Nissan j 2534 86x area. All looked good. Same result. I then sent an email to cust_assist@tweddle stating my issues. This is the response quoting word for word Gregg, It sounds like you did everything correctly. Double check that you didn’t put the .exe file in either of the locations you listed. If you haven’t, you may need to contact a company like Identifix for further assistance. If you have any further questions, please feel free to contact me. Regards, Nissan Customer Service Representative cust_assist@tweddle.com Business Hours Monday – Friday (EST) So really I need to contact Identifix? Why?
Description of Information not available
Correct operation of the NERS to program blank 5 speed rwd TCM/valve body with j 2534.
Description of steps taken to obtain information (help/contact function on website, websites, etc.)
Emailed cust_assist @tweddle for help. Reread the install and use manual for the new 5 spd blank tcm/valve body programming,
Other Comments or Concerns
I am not sure the NERS program is working correctly with j 2534 or I am a complete moron and can't work it correctly. I have successfully programmed with NERS multiple ecm's with the NERS program in the past. I believe i have a working knowledge enough to correctly do the Blank TCM/Valve body programming
Notes
- Paul Soar - 02/15/2016
Because there can be several reasons why an ECU programming did not complete, Nissan has requested the error log files from the client for review to help determine the cause.
Paul Soar - 02/16/2016
The client was able to provide an log file from a Nissan vehicle. Nissan in Japan is studying this log file to hopefully determine a cause.
Paul Soar - 03/04/2016
Update: Nissan is still currently reviewing the log files. No new information has been reported at this time.
Paul Soar - 03/22/2016
NML Japan have found what appears to be a software bug in the NERS 3.05 version. They are currently working on a fix. The NERS 3.05 software have been removed from our Tech Info website and reverted back to 3.04v.
Paul Soar - 04/06/2016
NML Japan is still working on the fix.
Paul Soar - 05/10/2016
The fix is in validation stage at this point. - Paul Soar - 06/10/2016
Nissan is still working on the validation.
- Paul Soar - 07/05/2016
NASTF is still monitoring this situation. Nissan is still working on this issue.
Paul Soar - 08/07/2016
Nissan has released a new version of NERS vs3.06 to Nissan-techinfo.com. This version will support Blank RWD, 5 speed programming.
Home